ACR3 Hot Bonder
ACR 3 Hot Bonder can achieve the most complete repair integrated composite device, suitable for a prepreg, resin, glass fiber, carbon fiber composite material structural repair.
Product Highlights
Easier and Better Composite Curing
- Single or dual zone
- 8.4" (213mm) touch-screen
- Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
- Universal voltage: 100-130VAC, 200-240VAC
- 30 amps output per heat zone
- 10 thermocouple sensors per zone
- Accepts J-type thermocouples
- Includes everything you need
Easy-To-Use Interface on a Full-Color HD Touch-Screen
|
|
Fast and Simple Data Transfer with USB Drive (USB Flash Disk Included)
- Transfer and archive post cure data history to your PC.
- Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft ® Excel ® and Word ®
- Transfer your programs quickly from one bonder to another
- Update your hot bonder easily with the latest software version for FREE.
Specifications
General
- Single or dual zone
- 8.4" (213mm) touch-screen with easy-to-use interface
- USB port for data transfer (USB flash disk included)
- Input ground fault interrupter breaker protected
- Audible and visual alarms for high and low temperature / vacuum limits
- Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters
Power
- Input Voltage: 100-130VAC, 200-240VAC
- MAINS supply voltage fluctuations up to ±10% of the nominal voltage
- Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
- Frequency: 50-60Hz
- 30 amps maximum per zone
- Output cord receptacle: NEMA L14-30R
Vacuum
- Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
- Pressure: 28in Hg (13.8PSI)
- Ability to manually adjust pressure for each zone
Temperature Control
- Cure up to 1400 o F (760 o C)
- 10 thermocouple sensor inputs per zone
- Accepts J-type thermocouple connectors
- Accuracy: ±3°F (1.67°C)
- Monitors all thermocouples for alarms
Environment
- Intended for use in dry environments. Do not expose to spray.
- Altitude up to 6562ft (2000m)
- Storage temperature range: -4 to 140 o F (-20 to 60 o C)
- Operating temperature range: 41 to 104 o F (5 to 40 o C)
- Maximum relative humidity: 80% for temperatures up to 88 o F (31 o C) decreasing linearly to 50% relative to humidity at 104 o F (40 o C)
- Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)
Support
Ordering Information
The ACR ® 3 Hot Bonder can be purchased either with or without heaters.
ACR ® 3 Hot Bonder Kit
Number of Zones | Voltage | Part Number |
1 | Universal Voltage | ACR-3-S |
2 | Universal Voltage | ACR-3-D |
ACR ® 3 Hot Bonder Kit includes
- ACR ® 3 hot bonder unit
- 10ft (3m) vacuum hoses (2 per zone)
- 10ft (3m) input power cord (1 per zone)
- 5ft (1.5m) heater output power cord (1 per zone)
- USB flash disk
- J-type thermocouples (10 per zone)
- Standard connector adapters for thermocouple receptacles (10 per zone)
- Vacuum bag feed-throughs (2 per zone)
- Extra printer ribbon and paper (1 per zone)
- DVD Training Video
ACR ® 3 Hot Bonder Kit with Heaters
Number of Zones | Voltage | Part Number | NSN* |
1 | 120VAC | ACR-3-S120KIT | 4920-01-538-9296 |
1 | 240VAC | ACR-3-S240KIT | 4920-01-538-9296 |
2 | 120VAC | ACR-3-D120KIT | 4920-01-545-5200 |
2 | 240VAC | ACR-3-D240KIT | 4920-01-545-5200 |
*Please indicate voltage when ordering with NSN.
ACR ® 3 Hot Bonder Kit with Heaters includes
- ACR ® 3 hot bonder unit
- One 10" x 10" (254 x 254mm) SR composite heat curing blanket per zone
- One 12" x 12" (305 x 305mm) SR composite heat curing blanket per zone
- One 16" x 16" (406 x 406mm) SR composite heat curing blanket per zone
- 10ft (3m) vacuum hoses (2 per zone)
- 10ft (3m) input power cord (1 per zone)
- 5ft (1.5m) heater output power cord (1 per zone)
- USB flash disk
- J-type thermocouples (10 per zone)
- Standard connector adapters for thermocouple receptacles (10 per zone)
- Vacuum bag feed-throughs (2 per zone)
- Extra printer ribbon and paper (1 per zone)
- DVD Training Video